Construction Guide
7
3.3.1
Connecting the Power Cord
DANGER
Cut off the power supply before connecting the cables.
Power supply: 220 VAC.
Connect live wire to L port, neutral wire to N port and grounding wire to PE port.
Press and hold the button of the corresponding slot with a small slotted screwdriver.
Insert the cable into the slot.
Remove the slotted screwdriver, and the installation is complete.
3.3.2
Connecting the Network Cable
Connect the network cable of the camera to 1of the 8 Ethernet ports. We recommend you
connect the network cable in sequence.
Connect the terminal to the switch through the G2 port.
