Dahua Technology IPC-HFW1230S1-0280B-S5, Быстрый старт

Страница: 9 / 17

Quick Start Guide
3
Select the devices that need initialization, and then click
Initialize
. Step 6
The password setting interface is displayed. See Figure 2-2.
Password setting Figure 2-2
Set and confirm the password of the devices, then enter a valid email address, and then click Step 7
Next .
The final setting interface is displayed.
Password can be modified or reset in System Settings .
Select the options according to your needs, and then click
OK
. Step 8
The
Initialization
interface is displayed after initialization is completed. Click the success
icon ( ) or the failure icon ( ) for the details.
Click
Finish
. Step 9
The device status in the Modify IP interface (Figure 2-1) turns to Initialized .
Modifying Device IP Address 2.2

You can modify IP address of one or multiple devices in one time. This section is based on
modifying IP addresses in batches.

Modifying IP addresses in batches is available only when the corresponding devices have the
same login password.
Do "Step 1" to "Step 4" in "2.1 Initializing Device" to search devices in your network segment. Step 1
After clicking
Search setting
, enter the username and password, and make sure that they
are the same as what you set during initialization, otherwise there will be wrong password
notice.
Select the devices whose IP addresses need to be modified, and then click
Modify IP
. Step 2