Dahua Technology DHIH1C, Руководство пользователя

Страница: 29 / 40

Name Function
Local Save
After changing a channel name, click , it is to only change the remote
device channel name on the server WEB. The remote device name remains
the same.
Sync to IPC
After changing channel name, click . It is to change the channel name on
the server WEB and the remote device.
Sync from
IPC
Select a channel and then click . It is to get remote device name.
Refresh Click to get the latest setup information.
Default Click to restore default setup.
Refresh Click to get the latest setup information.
Default Click to restore default setup. Click OK to save.
Name Function
Channel Please select a channel from the dropdown list.
Enable video Check the box to enable sub stream video function.
Code stream
type
It includes general stream, motion stream and alarm stream. The sub stream
supports general bit streams only.
Name Function
Local Save
After changing a channel name, click , it is to only change the remote
device channel name on the server WEB. The remote device name remains
the same.
Sync to IPC
After changing channel name, click . It is to change the channel name on
the server WEB and the remote device.
Sync from
IPC
Select a channel and then click . It is to get remote device name.
Please refer to the following table for detailed information.
2.7.2.4 Encode
Set the main stream and sub stream of the remote device.
Steps:
Step 1
Step 2
On the surveillance interface, from Setup->Camera->Encode->Encode.
System enters encode interface. See Figure 2-22.
Figure 2-22
Set parameters.
27