Web Configuration 74
Shutter
Figure 6-83
Configure the parameters. See Table 6-24.
Step 2
Table 6-24 Shutter parameters
Parameter
Description
Shutter Mode
Single Shutter: Video recording and snapshot share the same
exposure mode.
Double Shutter: Video Shutter and Snap Shutter can be separately
configured.
Half FPS: Video and image take half of the frame respectively.
Full FPS: Image takes 1FPS, and video takes the rest FPS.
Three Shutter: Video Shutter and Snap Shutter can be separately
configured, and a Recognition Shutter is added.
Three Shutter mode is available only when
Common Mode
is selected as
Snap Match Mode
from
Setting > ITC > Work Mode
.
Snap Tridim
Denoise
When it is
On
, 3D digital noise reduction (DNR) is enabled to reduce noise
of snapshots.
Video Tridim
Denoise
When it is
On
, 3D DNR is enabled to reduce noise of video.
Scene
You can change the scene and adjust the sharpness of corresponding
scene.
Three scenes can be selected: Daytime, Dawn/Dusk, and Night.
Sharpness
You can configure the sharpness of corresponding scene.
The higher the value, the more clear the image. But there will be noise if
sharpness is too high.
Exposure Mode
Two exposure modes are available: Auto and Manual.
Auto: Automatic exposure.
Manual: You need to physically configure the exposure, and the
camera remains the settings. You need to configure the interval of manual
exposure. 8 options ranging from 1/50 to 1/10000 are available. You can
also configure customized value and range.
