Dahua Technology DHI-ITC237-PW6M-LZF1050, Руководство пользователя

Страница: 73 / 98

User's Manual
64
4.5.4.2 Abnormality
Set relay-out mode of different events. When abnormality happens, system triggers alarm.
Step 1
Select Setting > Event > Abnormality .
Step 2 Select events from SD card, network error, illegal access, security exception and blocklist
car as needed.
Figure 4-72 No storage card
Step 3 (Optional) Select event type. You only need to select this for SD card and network error.
Step 4 Click On to enable various abnormalities.
Step 5 Configure parameters of each event.
Table 4-37 Abnormality parameters description
Parameter Description
Enable Check to enable corresponding abnormality event.
Relay-out
Check to enable the corresponding alarm output of abnormality event, and
select the corresponding port.
Signal Duration
The alarm linkage keeps running for the defined time after alarm ends.
The time range is 10 s–300 s.
Capacity Limit
Configure the storage available that triggers abnormality alarm.
Only need to configure when setting Event Type to Scarcity of Storage
Space in SD Card.
Login Error
Configure the number of login error allowed. The range is 3–10 times.
Only need to configure when setting Illegal Access .
Send Email
The system sends an email to the defined email address when an alarm is
triggered. To set the email address, go to
Setting > Network >
SMTP(Email) .
Only need to configure when setting Illegal Access and Blocklist Car .
Step 6 Click Confirm .
4.5.5 Storage
This section provides guidance on setting associated information of storage, and record control.