Dahua Technology DHI-ITC237-PW6M-LZF1050, Руководство пользователя

Страница: 41 / 98

User's Manual
32
Table 4-13 Loop I/O parameters
Parameter Description
Trigger Mode Config
IO Only Loop I/O can be selected.
Loop 1 Set the loop trigger mode.
●
Not triggered : No capture is triggered.
●
Rise Edge : Capture is triggered when the vehicle
enters loop.
●
Fall Edge : Capture is triggered when the vehicle
exits loop.
When the scheme is single_in1-snap , then loop 2 can
not be set.
Loop 2
IO Config
Scheme
●
Set IO snapshot scheme.
●
Single_in_1 : Lay single loop, and it will take a
snapshot when the vehicle enters a loop.
●
Double_in_1 : Lay double loops, and it will take a
snapshot when the vehicle enters the first loop.
●
Double_in_2 : Lay double loops, and it will take a
snapshot when the vehicle enters the second loop.
Loop
Mapping
Select the corresponding relationship between logical
loop and physical loop.
●
When the scheme is single_in_1 , only need to select
the physical loop corresponds to logical loop 1.
●
You need to configure this in mix mode.
Step 4 Click
Confirm
.
4.5.1.2 Intelligence
4.5.1.2.1 Recognition
You can set vehicle recognition parameter, recognition mode, and some other functions.
Step 1
Select Setting > ITC > Intelligence > Intelligent Analysis > Recognition .