Dahua Technology DH-PFR4K-D300, Руководство пользователя

Страница: 54 / 101

User’s Manual
48
For UPnP configuration on radar web interface, see following steps.
Select Setting > Network > UPnP .
The UPnP interface is displayed. See Figure 4-28.
UPnP
Select Enable to enable UPnP function, and there are two mapping modes: Custom
and Default.

Select Custom , and then you can modify external port as needed.

Select Default , and then the system finishes mapping with available port
automatically. You cannot modify mapping relation.
Select Start Device Discover as needed.
Click Save to make the configurations valid.
4.2.7
SNMP
Simple Network Management Protocol, which can be used to enable software such as MIB
Builder and MG-SOFT MIB Browser to connect to the radar and manage and monitor your
device.

Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB
Browser.

Contact technical support for the MIB file that matches the current version.
Select Setting > Network > SNMP .
The SNMP interface is displayed, see Figure 4-29 and Figure 4-30.
SNMP (1)