63
configured rules are triggered in the detection areas (out of the exclusion areas), an alarm will be
triggered. For the thermal channel, you can also configure the sensitivity.
Procedure
Step 1
Select
Setting
>
Smart Thermal
>
IVS
>
Global Setup
.
Figure 5-32 Global setup
Step 2
Select the channel.
●
Select
1
in
Channel
to configure the rule for the visible channel.
●
Select
2
in
Channel
to configure the rule for the thermal channel.
Step 3
Add detected area and excluded area.
1) Click
Add Detect Region
to draw a detected area on the image. Right-click to end
drawing.
Click
Add Detect Region
again to re-draw.
2) Click
Add Exclude Region
to draw an excluded area on the monitoring image. Right-
click to end drawing.
●
Click
Delete Excluded Area
to delete the excluded area.
●
An excluded area takes effect only when it has been drawn in the detected area.
●
Multiple excluded areas can be drawn in the detected area.
Step 4
Click
Save
.
5.4 Call Detection
Configure call detection to help you monitor the calling behavior at locations such as gas stations.
Once a calling is detected, alarm will be triggered.
This function is only available on the visible channel.
Содержание D-TPC-BF1241-B3F4-DW-S2
Страница 1: ...Thermal Network Camera Web Operation Manual V2 0 1...
Страница 138: ...129 Figure 6 58 User settings Step 3 Configure parameters Figure 6 59 Add user operation permission...
Страница 142: ...133 Figure 6 64 Modify user 1 Step 3 Select the Modify Password checkbox Figure 6 65 Modify user 2...
Страница 156: ...147 Select Setting Information Online User Figure 7 7 Online user...
