Dahua Technology D-IPC-HUM8441-E1-L1, Быстрый старт

Страница: 12 / 21

Quick Start Guide
5
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see the Web Operation Manual.
●
Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
●
Device initialization is available only when the camera (whose IP is 192.168.1.108 by default) and
the PC stays on the same network segment.
●
Carefully plan the usable network segment for the device.
●
The following figures and pages are for reference only.
2.1 Initializing the Camera
Step 1 Search for the device that needs to be initialized through ConfigTool.
1. Double-click ConfigTool.exe to open the tool.
2. Click Modify IP.
3. Select the searching way, and then click OK .
4. Select one or several cameras in uninitialized status, and then click Initialize.
Step 2 Select the devices to be initialized, and then click Initialize.
If you do not provide the email address for password reset, you can reset the password
only through XML file.
Figure 2-1 Password setting