Sticking foot stickers at the temperature measurement position
⚫
Monitoring picture, the following is the effect of one person in front of the 13mm
lens at the 3m position
1.5
Installation Precautions
⚫
The thermal imaging camera and blackbody are installed on the same side to
avoid the occlusion between the camera and blackbody
，
the blackbody
radiation surface should be facing the camera. If the blackbody is facing the
camera, the four sides of the blackbody shell will not be exposed, as shown in
the following figure:
⚫
The moving direction of the flow of people is toward the camera. During the
test, the forehead of the target person is facing the camera. It is better to stay
and face the camera for temperature measurement. Temporary measures can
be adopted on site to plan the walking route of personnel and guide the person
to the camera position; for scenes with large indoor and outdoor temperature
