DAHON BIOLOGIC REECHARGE - 2010, Руководство пользователя

Страница: 21 / 27

8. Attach the cable
connector to the
dynamo hub.
2. Remove the
cover of the
cable connector.
4. Twist the ends of
the ReeCharge
cable with that of
the light cable.
3. Pull out the wires
from the grey wire
holder.
5. Put the connected
light and ReeCharge
wires back into the
grey wire holder.
WARNING : Please
make sure the two
groups of wires are not
in contact with each
other. This will short-
circuit the electronics
and might cause
damage to the light
and the ReeCharge.
7. Put the black cover
back onto the grey
wire holder.
6. Fix the wires into
the grey wire holder
by bending them
around the holder.