Chapter 6 Memory Design Management
6.
Click “X interval” and “Y interval” to input values.
7.
Click
to combine the designs and return to the design operation
selection interface. Click
to cancel the operation and return.
6.9 Edit Combined Design
The combined design (or Packed Design) means a design group combined from several
certain (less than 99) memory designs after setting their parameters. The packed design is set
as automatic continuous embroidery. In the memory design management interface the icon of
the packed design is shown as
. To embroider a combined design, user needs return to the
memory design management interface after creating or editing the combined design. If it’s
already in the embroidery preparation status, click the design and “Set Emb Design”, and the
system will automatically return to the main interface. Then after embroidery confirmation,
pull the bar for embroidery. The user can also edit the combined design into the common
design by the editing function, so as to check and embroider the design.
1.
Click
in the main menu to enter the memory design management interface.
2.
To edit a saved combined design, user needs select the combined design first. To
create a combined design, please carry out the following operations.
3.
Click
to enter the memory operation selection interface.
4.
Click “Edit Combined Design” to enter its operation interface.
Owner’s Manual of BECS- 285A Computerized Control System
61
