Chapter 6 Memory Design Management
4.
Click “Make True Design Frame” to enter its operation interface
5.
If user doesn’t use the default values, please click the design number and design
name to change them.
6.
Click
to create a design and return to the design operation selection
interface. Click
to cancel the setting and return.
6.8 Combine Design
This function is to combine two designs into a new one. The interval between the two
designs is the distance from the end point of the first design to the start point of the second
design.
1.
Click
in the main menu to enter the memory design management interface.
2.
Click
to enter the design operation selection interface.
3.
Click “Combine Design” to enter its operation interface.
4.
Choose two designs in design selection area, and click
to enter the
interfaces for combining designs. If more than two designs are selected, there will be a
prompt to tell you to reselect.
5.
If you don’t use the default values, please click the design number and design
name to change them.
60 Owner’s Manual of BECS- 285A Computerized Control System
