DAGU Arexx SOLAR E CAR JSR-SC2, Инструкция по эксплуатации

Страница: 10 / 32

Important!
Before you start with the construction of this kit, please identify each part using the diagram in step A.
Then read the entire set of instructions before you start with the assembly.
Wire, blue color 8 pc. 25 cm
Miniature light bulb 1 pc.
Motor (wired)
1 pc.
Motor pinion
1 pc.
Screw M3 x 8
5 pcs.
Tappingscrew
M2.3 x 8
2 pcs.
Screw M3 x 20
1 pc.
Lock nut
4 pcs.
Nut M3
2 pcs.
Gear shaft
1 pc. (Back wheel)
Switch lever
1 pc. (Metal)
Panel mount support
2 pcs. (Plastic)
Switch mount
2 pcs. (Metal)
Gear shaft holder
1 pc. (Plastic)
Battery clips
4 pcs. (Metal)
Chassis
1 pc. (Plastic)
Wheel
4 pcs. (Plastic)
Solar panel holder
1 pc. (Plastic)
Solar panel
1 pc. (1.5V/350mA)
Wheel shaft
1 pc. (Front wheel)
Motor holder
1 pc. (Plastic)
Necessary tools
A self-tapping screw looks similar to a wood screw.
When you screw it in a hole, it cuts the threads at the same time.
Never try to screw it down all the way for a first time,
because it may easily become stuck or you will damage its head.
Do not screw a tapping screw in and out too often because the screw hole may become enlarged and the screw will loose all
grip and proper function.
The size of a screw is expressed by thickness and length.
A screw with the marking M2 x 10 means 2 mm thick.
The length of the thread is 10 mm. An M2 nut is used for an
M2 screw so the nut always corresponds with the screw thickness.
Screws and nuts
Wrench
Philips
screwdriver
Cutter
Flatnose
plier
Wrench
M2 / M3
Self-tapping screws (Parker)
GENERAL ASSEMBLY INFORMATION
Length
Thickness
INCLUDED!
INCLUDED!
Parts list & Assembly instructions SOLAR E-CAR
Silicon tube
1 pcs. (80mm)
Sticker set
1 pc.
This is the
proper way
to fasten
a lock nut
This kit includes a small wrench.
Please use this wrench to fit the M2
and M3 nuts in a proper way.
You can use it instead of a plier.
English