Installation
The
InvestiGater
easily connects to the
CCD100
through
a single cable. This standard S-video type cable (Dage P/N
737980-01) provides Power, Gate and Video connections
between the instruments. Since the
InvestiGater’s
power
supply provides power for both units, do not use the
CCD100
power supply. Figure 1 shows the connection of the
InvestiGater
to the
CCD100
.
Figure 2 shows the
InvestiGater
connected to the
DAGE
CCD-300RC
. The
CCD-300RC
needs an
Aux Gating Cable
(Dage P/N 835320-08), which is included with the cooled
models. Note in this configuration both units need a power
supply connection.
Figure 3 shows the
InvestiGater
connected to the
DAGE
CCD-72AS
or another CCD Camera which uses a BNC type
Gating connection.
MONITOR
P/S
CCD100
InvestiGater
REMOTE
CAMERA
VID OUT
POWER
TABLE TOP
SWITCHING
P/S
WALL
MOUNT
ADAPTER
RC100
REMOTE
GATE
WARNING:
DO NOT USE WALL MNT ADAPTER
NOTE: INVESTIGATER POWER SWITCH CONTROLS CAMERA
POWER. RC100 POWER SWITCH IS NON-OPERABLE.
WHEN USING INVESTIGATER.
(OPTIONAL)
Figure 1: InvestiGater/CCD-100 Connection