23
Remove the two screws on the top cover and slide it backwards.
PRINTED CIRCUIT CARD REMOVAL
Unscrew the desired PC board locking screws. Unsnap the
connectors and pull them upwards. Slide the card back slightly and
remove.
FUSE
The 2400 has a fused power supply. The fuse is located inside the
cabinet adjacent to the power transformer. It is easily snapped out
for inspection if the power switch pilot light should fail to function. It
is a slow-blow 1/2 amp. 250 volt 3AG type.
E. GUARANTEE
The 2400 system is warranted to be free from defects caused by
materials, workmanship, and construction for a period of one year
from date of purchase. During this period, Dagan Corporation will
service your instrument at no charge. A letter or phone call to us can
usually provide enough data to confirm the problem and we will then
immediately air ship you the plug-in replacement cards. If the
problem is more serious, or if you prefer that we replace any faulty
cards, return the instrument to us and we guarantee it will be
repaired immediately and shipped back to you.
We know that you are only able to depend on and get maximum use
from your instrument if service is prompt, courteous, and correct.
9/1/08
