Daga Flexy-Heat CIN Comfort, Инструкция по применению

Страница: 11 / 36

11
In order to prevent any risk of danger, do not open the control or
connection. Only qualified technical personnel from the brand´s Of-
ficial Technical support service may carry out repairs or procedures
on the device.
Any incorrect use or improper handling of the product shall render
the warranty null and void. Only an authorised technical support
service centre may carry out repairs on this product.
B&B TRENDS SL. disclaims all liability for damages that may
occur to people, animals or objects, for the non-observance of
these warnings .
INSTRUCTIONS FOR USE
Completely stretch out the electric blanket over the mattress, leav-
ing a space free at the top, to place the pillow, fitting the elastic
straps of the electric blanket to the mattress, and then place it
under the sheet. Prevent any wrinkles, folds or creases and ensure
that the outlet is at the top of the bed. (See figure 1).
Then proceed to make the bed in the usual way.
Avoid placing any bags or other heavy objects on the bed while the
electric blanket is turned on , as well as its use at the same time
as other sources of heat such as hot water bottles, heating pads or
similar products.
In order to prolong the shelf life of your product, make sure that the
regulator control switch is in the “ 0 “ position before connecting or
disconnecting it from the mains.
In order to turn on the product, you must select the slider switch
on the control, setting it to position 1, 2 or 3 (Fig.2).
The maximum operation time is 3 hours, after which the automatic
safety shut-down will immediately activate. The product will no
longer heat up when in this state.
Select the “ 0” position in order to turn off the product before you
disconnect the device from the mains.
This electric blanket comes with rapid heating technology, which
enables the heat to be felt just 15 minutes after turning on the
control knob, regardless of the selected temperature. Set the tem-
perature to a lower level after this time.
This product also has a higher temperature in the foot area for an
added feeling of comfort and convenience. This is automatically ac-
tivated when any of the three temperature positions on the regulator
control are selected.
The control should be set to its minimum temperature (level 1)
when using the product for extended periods of time. Try to avoid
any excessive exposure to heat from high temperatures The highest
control temperature position (level 3) should be used only for the
time necessary to obtain a comfortable temperature, and the tem-
perature should be gradually lowered to a lower position after this
threshold has been reached.
ENGLISH