DAF LF45 Series, Руководство пользователя

Страница: 66 / 74

0
PAINT TREATMENT
Paint treatment LF 45/55 series
1-8
1.6 RESPRAYING GLASS-FIBRE REINFORCED POLYESTER PARTS
These parts can be recognised by the visible
fibre-glass structure on the rear of the part, and
the gel coating on the front of the part.
1. Remove any preserving agents, if
applicable; see “General Operations”.
2. Clean the area to be resprayed with a
solvent.
3. Sand the area to be resprayed first with P80
sand paper and then with P180 sand paper.
4. Remove any dust from the sanded section
with a Tack-rag cloth.
5. Fill the area to be resprayed.
6. Leave the filler to dry.
7. Apply spray filler to the part to be
resprayed.
8. Leave the spray filler to dry.
9. Sand the filled area first with P80 sand
paper and then with P180 sand paper.
10. Remove any dust from the area to be
resprayed with a Tack-rag cloth.
11. Clean the area to be resprayed with a
solvent.
12. Again remove any dust from the area to be
resprayed with a Tack-rag cloth.
13. Blow ionised air over the area to be
resprayed, or clean the area with an
anti-static liquid.
14. Apply filler to the area to be resprayed.
15. Leave the filler to evaporate/dry.
6
ǹ 0201