DAF LF45 Series, Руководство пользователя

Страница: 31 / 74

0
LF
45/55 series Safety instructions and warnings
SAFETY INSTRUCTIONS AND WARNINGS
1-13
1.7 AVOIDING THE RISK OF FIRE
- Check fuel pipes for leakage and fix any
leakage immediately (see also Plastic
pipes).
- When fitting steel fuel pipes take into
account the points listed below.
Fit the fuel pipe free from tension.
Preformed fuel pipes must not be bent.
When refitting a banjo bolt on a fuel pipe,
always fit new sealing rings and tighten the
banjo bolt to the specified torque.
After tightening, check the fastening for fuel
leakage.
Steel fuel pipes fitted without due care and
attention can cause fuel leaks which lead to
fire hazard.
- In the event of fuel and/or oil leakage or
spillage, the engine encapsulation must be
thoroughly cleaned. First apply a
degreasing agent to the encapsulation
material. Then wash down the
encapsulation with a steam cleaner or with
a high-pressure cleaner.
Maintain a minimum distance of 50
cm between the engine
encapsulation and the sprayer
nozzle to prevent damage to the
encapsulation.
- Clean the engine compartment, in particular
the encapsulated part, at regular intervals
by removing flammable material such as
dead leaves and sawdust.
- Do not leave cleaning rags etc. in the
engine compartment.
- Repair leaks in the exhaust system without
delay. Badly corroded exhaust components
should be replaced before they fail.
2
ǹ
0201