DAF DAVIE XDc II, Быстрый старт

Страница: 18 / 68

16 © 200847
VCI Quick Start Manual
EN
Table of content
1 Vehicle Communication Interface (VCI)
2 Led Status
3 Top view VCI
4 How to switch wired or wireless communication?
5 VCI Tray Icon
6 WLAN Quality Indicator
7 More than one DAVIE XDc II in the workshop?
NOTE:
All information in this document is based on the effective "Hardware Product state" at the publishing date. This Quick start Manual is created for
the internal use in the DAF Service Organisation.
Severe injury or damage may result if unqualified persons attempt to work on the equipment, if general safety guidelines or
the safety instructions on the DAVIE XDc II and VCI are disregarded.
In the interest of continuing product development, DAF reserves the right to change specification or equipment at any time without notice. No
part of this publication may be reproduced and/or published by printing, photocopying, microfilming or by any other means without the
manufacturer's prior permission in writing.
1 Vehicle Communication Interface (VCI)
The DAVIE XDc II communicates with the ECU's in the truck via the truck side "Diagnostic Connector" by using a
special communication interface, called the Vehicle Communication Interface (VCI).
The DAVIE XDc II provides Wireless and USB communication between VCI and DAVIE XDc II.
At delivery the communication settings are already set up.
The communication settings could be changed with the VCI Configuration Manager software.
NOTE:
Please take care. The use of wireless communication has to conform to the local regulations of your country.
To prevent immediate shutdown of the VCI, the VCI is capable of buffering itself by the enclosed battery
}