DAF CF65, Руководство по обслуживанию

Страница: 70 / 116

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
3-26
©
200518
Inspection and adjustment
5
ΧΦ65/65
(II) series
Explanatory notes on instruction plate for
CF65 (II)
This plate is mounted on the rear door pillar of the
vehicle. The data relating to axle loads and output
pressures are listed on the instruction plate
following the sequence of the axles beneath the
vehicle.
So "1" is the front axle and "2" the rear axle.
"G" stands for the load in kg.
These values can be used to check the brake
pressure values of the front axle and to carry out
the inspection/adjustment below at the same
time. To do this, connect a pressure gauge to the
test connection of one of the front axle brake
cylinders.
Inspection and adjustment, load-dependent
control valve, leaf suspension
1. Measure the weight plus load of the rear
axle(s).
2. Check the attachment of the control lever
and its ease of operation.
3. Check whether the correct valve and the
correct springs have been fitted (for
information, see the instruction plate).
4. Check the length of the control lever
(see "L" on the instruction plate).
5. Connect pressure gauge (4) to the test
connection close to connecting point

on
the load-dependent control valve (input
pressure).
6. Connect pressure gauge (2) to the test
connection on one of the brake cylinders
(service brake connection) of the rear axle.
7. Make sure that the reservoir pressure is
higher than 8.5 bar throughout the testing
process.
8. Depress the brake pedal until the pressure
gauge (4) indicates a value of 8 bar.
R600944
1/4
4
2
2
R600562
1
https://www.truck-manuals.net/