12
(3) Check the LCD screen shows normal display as below;
(4) Choose one of the options on the LCD for your purpose. (SPOT / JET)
(5) Choose the option among Pulse Mode, One-Shot Mode, Continuous Mode.
(6) In case you select Pulse Mode or One-Shot Mode, you might take options for adjusting output power as
below;
Setting Value
SPOT
JET
Pulse Mode
2 / 5 / 10 / 20 / 40 / 80 [Hz]
2 / 3 / 4 / 5 [Hz]
One-Shot Mode
0.2 / 0.4 / 0.6 / 0.8 / 1.0 [sec]
(7) When Continuous Mode is selected, specified output level outputs continuously.
(8) The output level can be adjusted in 1 ~ 3 levels. The level raises by 1 level when pushing button
and it goes down by 1 lever when pushing the button
.
(9) After the user setting is complete, press the button
once. The button is changed as
.
(10) The user can set Auto / LED / INFINITE modes.
(11) When the setup is completed, place the handpiece at the target area and then press the shot button on
the handpiece to start.
Caution
• Do not touch the handpiece with wet hands.
• Do not remove or connect the handpiece while the device is operating.
(12) When all procedures have been completed, make sure to press the button
and let the button
changed as
.
