25
3-3. DOOR S/W
1) The working principle of Door S/W
① Door Locking
Bimetal on (3 sec) → solenoid (supply 20msec pulse 2 times)
② Door Unlocking
Bimetal off → solenoid(supply 20msec pulse, until lock)
③ After door locking all parts can work nomally.
④ After pressing power button, if the temperature of wash thermistor is over 61℃ or the water
level is over the safety level, the door will be locked.
⑤ The door will be unlocked immediately after all processes are finished.
⑥ The door can be opened during processing if there is no problem to unlock.
3-4. Child Lock
① Press the "Child Lock".
② Under the Child lock function , any other button is not working.
③ During Child Lock function, Child Lock LED will be on
④ In order to unlock Child Lock mode, press the "Child Lock" button.
3-5. The sequence of drain
① After starting the drain, the remaining drain time is 15 sec to reset point.
② If the checking time to reset point is over 10 min, OE signal will be appeared on display.
③ If the temperature is over 60℃ , the cold water will be supplied to low the temperature. the
drain will start under the 55℃.
WFW0A1*,WFW0A2*,WFC0A2*(SM).indd 25
16. 5. 24. 오후 3:20
