INSTALLATION ON THE APPLICATION
After successfully installing your AM301 central to your
Daewoo Home Connect control app, you can add your
door sensor.
1. To do this, click on "add an acc" from the page
of your AM301 control unit.
2. Remove the security tab from your device and
separate the two parts of the contactor.
3. The application then detects your accessory,
confirm the addition.
4. Install your contactor within your home as shown
below.
• When installing, do not give the transmitter too much
impact.
• Avoid using it in an environment with strong magnetic
field and high current.
• For the transmitter with indicator lights, if the power of
the battery (battery) exceeds the maximum power, the LED
will be damaged, its life will also be considerably reduced.
If the power is below the specified range, the LED dims or
does not light.
• The transmitter must not be in contact with water or
corrosive materials.
PRECAUTIONARY USE
