10
2000W Induction Hob
Model No. SDA1805
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cleaning your Induction Hob
•
Always unplug the Induction Hob from the mains supply and allow to cool
before cleaning.
•
DO NOT
submerge any part of the main body or mains cable in water or any
other liquids.
•
Wipe clean with a soft damp cloth.
•
Never clean any part of the Induction Hob with harsh or abrasive cleaners.
Error Codes
Error Code
Possible Cause
E0
There is no pan or an unsuitable pan on the appliance
E1
Supply voltage is too low (less than 88V)
E2
Supply Voltage is too high (more than 280V)
E3
The temperature of the ceramic plate surface is too high
E4
Ceramic plate temperature sensor has a bad connection
E5
The heat sensor of the radiator is overheated or the fan is disconnected
E6
The heat sensor of the radiator is disconnected
Technical Specification
Rated Voltage
220-240V~ 50-60Hz
Rated Power
2000W
Model Number
SDA1805
Protection Class
II
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains lead
and should the fuse needed replacing, you must use an ASTA approved one
(conforming to BS 1362 of the same rating). Never use a plug with the fuse cover
missing. If in doubt, consult a qualified electrician.
If you need to remove the plug -
DISCONNECT FROM THE MAINS
- and then cut it
off the mains lead and immediately dispose of it safely. Never attempt to reuse
the plug or insert it into a socket outlet as there is a danger of electric shock.
