8
Balmoral Kettle
Model No SDA1750 & SDA1751
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Boil dry protection
Should you accidentally let the appliance operate without water; the boil-dry
protection will automatically switch off the power. If this occurs, allow the
appliance to cool and reset before use.
Important
–
Descaling your Kettle/Reducing Limescale Build up
•
To prolong the life of your kettle it is imperative that it is descaled regularly.
•
The frequency of the descaling depends on the hardness of the water in your
area and how often the appliance is used.
•
In extreme hard water areas, descaling your kettle at least once a month is
highly recommended also the use of filtered water in your kettle will increase
the life expectancy and help prevent excessive lime scale build up.
•
If the kettle switches off before it boils or has a white deposit building up inside
then it will need to be descaled.
•
Do not use vinegar but a commercially available descaling agent; carefully follow
the quantities recommended in the instructions of the agent:
Push the
Switch
(4) down which will
illuminate and the water will begin to boil.
At the end of the boiling cycle the
Switch
(4)
will automatically switch off (pop up).
Wait until the water has finished boiling
before removing the kettle from the
Base
(3).
WARNING! DO NOT
move the kettle
whilst it is still boiling
–
risk of scalding!
Fill your kettl
e to the ‘MAX’
mark on the body or the water
quantity recommended by the
descaling product.
Add a descaling agent to the kettle
according to the descaling products
instructions.
6
1
2