Double Stainless Steel Hot Plate
SDA1732
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
NB
During the first few minutes of initial use, you may notice a slight odour and a little
smoke. This is normal and will quickly disappear, it is the coating applied to the heating
elements to prevent any corrosion during transit.
Description of parts
Before the first time you use your Hot Plate
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Before using your Hot Plates for the first time, turn the Thermostat controls to the highest
setting (5) for 3 to 5 minutes to condition the protective coating.
NB
This should be the only time the Hot Plates are operated without a cooking utensil on it.
A pan 15 - 18cm in diameter is recommended for the larger Hot Plate and a pan up to 15cm is
recommended for smaller hot plate to achieve best results. Smaller pans are not
recommended. Ensure larger pans do not protrude beyond the edge of the Hot Plate or the
controls.
Operating Instructions
•
Place the Hot Plate on a solid, level non-flammable surface.
•
Ensure that Thermostat Controls are in the off position.
•
Insert the mains plug into the mains socket.
•
Rotate the Thermostat Controls clockwise from 0 (low heat) through to 5 (high heat) and
leave at the desired setting. The Neon Indicator will light to show the hot plates are heating
up.
•
Once the hot plates are at the correct temperature and ready to use, the Neon Indicators
will go out,
NB
the Neon Indicators will go on and off during use to show the set temperature of the hot
plates are being maintained.
•
Return the Thermostat controls to the off position and remove the mains plug from
the socket after use.
Care and Use of your Hot Plate
•
Always disconnect the Hot Plate from the mains power supply and allow to cool before
cleaning.
•
Clean the outside of the Hot Plate with a soft damp cloth. Never clean the Hot Plate with
harsh or abrasive cleaners.
•
Do not submerge any part of Hot Plate or its cord in water or any other liquids.
Neon Indicator
Thermostat Controls
Small Hot Plate
Neon Indicator
Small Hot Plate
