7
Hand Blender Set
Model No.: SDA1622
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Use the low speed for small amounts and the turbo speed for large amounts and
harder ingredients.
If you wish to blend in a saucepan, remove the pan from the heat and allow to
cool a little before using the blender.
DO NOT
leave or use the blender in a pan
whilst on the heat.
Do not run the blender in free air otherwise damage may occur.
Whilst blending heavier mixtures, do not use the blender for longer than 50
seconds with 4 minutes rest in between.
Releasing attachments
Using the Chopper
Use the Chopper for chopping ingredients such as nuts, meat, onions, hard
cheese, boiled eggs, garlic, herbs and dry bread.
WARNING!
The blades are very sharp, so be careful whilst handling the blade
unit. Be especially careful when removing the blade from the chopper bowl for
emptying and cleaning.
5.
Press either the
Low Speed button
(1) or the
Turbo Speed button
(2) to blend
the ingredients.
To release attached accessories
from the
Motor Unit
(3), press the
Accessories Release buttons
(4)
simultaneously on either the side
of the motor unit as shown right:
1.
Place the
Chopper Blade
(10)
into the
Chopper Bowl
(9).
2.
Place the ingredients into the
Chopper Bowl
(9).
3.
Place the
Chopper Lid
(8) onto
the
Chopper Bowl
(9).
4.
Finally, push the
Motor Unit
(3) onto the coupling on the
Chopper Lid
(8) until it clicks
into place.
8
10
9
