022-00028AE Operation and Maintenance Manual
Operating Controls 2-35
11.
PARKING BRAKE SWITCH
O.
In this position, the parking brake is
"RELEASED" and the monitor light
on the front instrument panel turns
"OFF."
I.
In this position, the parking brake is
"APPLIED" and the monitor light on
the front instrument panel comes
"ON." This brake can also be used as
an emergency brake.
12.
PILOT CUTOFF SWITCH
O.
In this position the operator cannot
operate the pilot control valve lever
(joystick).
I.
In this position the operator can fully
control the movement of the pilot
control valve lever (joystick).
WARNING!
Set the parking brake switch in the
"I" (APPLIED) position before leaving
the loader. Make sure to "APPLY" the
parking brake switch before trying to
start the loader.
CAUTION!
Do not use the parking brake to stop
the loader, except in an emergency;
otherwise, it might cause premature
wear or damage of the brake.
CAUTION!
When driving or parking, the pilot
cutoff switch should be changed to
"O" position.
HA0O2019
P
O
I
Figure 61
AOO0220L
Figure 62
HBOI110L
O
I
Figure 63
