022-00028AE Operation and Maintenance Manual
Inspection, Maintenance and Adjustment 4-17
5.
Do not force the belts into the pulley grooves by prying with a screwdriver or pry bar. This will damage
the belt side cords which will cause the belts to turn and result in complete destruction of the belts in
operation.
6.
Belts on new machines and replacement belts lose their tension as they seat into the pulley grooves.
Check the tension of new belts at 20 hour intervals until tension is stabilized and thereafter, every 250
hours. If the tension falls below the required minimum, the belt slips damaging the belts and pulley
grooves.
NOTE:
When operating in abrasive conditions, check tension every 100 hours.
CHECK AIR INTAKE SYSTEM
1.
Park the machine on a level surface, apply
the parking brake, lower the attachment to
the ground, and shut down engine.
2.
Check the engine intake hose, and hose
bands for damage and tightness.
3.
If damaged, wrinkled or loose, replace or
retighten or contact your nearest Daewoo
loader dealer.
WARNING!
Hot engine components can cause burns.
Avoid contact with hot engine
components.
IMPORTANT
Severe engine damage will result
from running with unfiltered air.
Do not operate engine if any leaks or
defects are found on air intake
system.
HAOA050L
Figure 24
Figure 25
