Daewoo L510B, Руководство пользователя

Страница: 9 / 33

English - 9 English - 8
Self Diagnosis
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks if
the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
Normal range
(Non-interlaced mode only)
H : 30 - 62 KHz (1024 dot Max)
V : 50 - 85 Hz (768 dot Max)
Reset the screen to the Factory Preset
Display Settings.
RECALL
Choose automatically the proper
horizontal position and vertical position &
size of the screen image.
AUTO
POSITION
Display horizontal & vertical frequency
and polarity.
STATUS
ICON CONTROL FUNCTION
OSD
TIME OUT
Adjust the display OSD Menu.
Adjust the display image quality (if the
screen proceed to scaling up).
SHARPNESS
AUTO
TRACKING
Adjust the horizontal & vertical picture
image quality and size.
Select language for OSD (6 languages).
LANGUAGE
Adjust the width (horizontal size) of the
screen image.
CLOCK
R
G
B
Adjust the OSD position horizontally (left
or right) and vertically (up or down).
OSD
POSITION
OSD
Choose different preset color temperatures
or set your own customized color
parameters.
Sharpen the focus by aligning the
illuminated pixels and adjust until the
screen image looks focused, crisp and
sharp. Adjusting the
CLOCK FINE
after
the
CLOCK
adjustment will produce a
clear screen.
Adjust the red color.
Adjust the green color.
CLOCK FINE
COLOR TEMP
RED CONTROL
GREEN
CONTROL
Adjust the blue color.
Adjust the position of the display
horizontally (left or right) and vertically
(up or down)
.
BLUE
CONTROL
H. CENTER &
V. CENTER
ICON CONTROL FUNCTION
OSD Functions
Adjust the contrast of image, the
difference between light and dark areas on
the screen.
CONTRAST