9
The oven light turns on while the oven is working.
The oven door can be opened at any time during operation. The oven will
automatically shut off.
Each time a button is pressed, a BEEP will sound to acknowledge the
press.
The oven automatically cooks on full power unless set to a lower power
level.
The display will show nothing when the oven is plugged in. When you
open the door, the display is turned on and beep sounds.
When the Stop/Clear button is pressed during the oven operation, the
oven stops cooking and all information retained. To erase all information
press the Stop/Clear button once more. If the oven door is opened during
the oven operation, all information is retained.
If the Start button is pressed and the oven does not operate, check the
area between the door and door seal for obstructions and make sure the
door is closed securely. The oven will not start cooking until the door is
completely closed or the program has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 240V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it
on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
4. Set required programme and time, then press Start.
5. Once cooking is complete take care removing container as it will be hot.
1
2
3
4
5
6
7
Make sure the oven is properly installed and plugged into the electrical
outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the Power button. The chart shows the
display, the power level and the percentage of power.
Press Power pads
percentage of
power
Output Power 800W
Display
Wattage
once
100%
P-HI
800W
twice
80%
P-80
640W
3
60%
P-60
480W
4
40%
P-40
320W
5
20%
P-20
160W
KOR9LBKW,KOR9LBKR,KOR9LBKC,KOR9LBKBL,KOR9LBKM_KOR669R(영)_가로A5.indd 9
2017-11-24 오전 11:17:28
