6
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass
tray. The glass tray must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
When the oven door is opened, the
turns off.
The oven door can be opened at any
time during operation by touching the
door release button on the control
panel. The oven will automatically shut
off. To restart the oven, close the door
and then touch START.
Each time a pad is touched, a BEEP will
sound to acknowledge the touch.
The oven automatically cook on full
power unless set to a lower power level.
The display will show ":0" when the
oven is plugged in.
Time clock returns to the present time
when the cooking time ends.
When the STOP/CLEAR pad is touched
during the oven operation, the oven
stops cooking and all information
retained. To erase all information
(except the present time), touch the
STOP/CLEAR pad once more. If the
oven door is opened during the oven
operation, all information is retained.
If the START pad is touched and the
oven does not operate, check the area
between the door and door seal for
obstructions and make sure the door is
closed securely. The oven will not start
cooking until the door is completely
closed or the program has been reset.
Wattage output chart
• The power-level is set by pressing the POWER pad. The chart shows the display, the
power level and the percentage of power.
Make sure the oven is properly installed
and plugged into the electrical outlet.
1
2
3
4
5
6
7
8
Touch Power pad,
Once the Touch
POWER
P-HI
100%
9
P-90
90%
8
P-80
80%
7
P-70
70%
6
P-60
60%
5
P-50
50%
4
P-40
40%
3
P-30
30%
2
P-20
20%
1
P-10
10%
0
P- 0
0%
Power Level (Display)
Approximate Percentage
of Power
