16
Changing User Options
User Options can be changed to suit individual preferences.
1. Open the door.
• Display turns off.
2. Press and hold STOP pad for a while.
• When the oven enters Option Code mode, it will show "CODE---" in
the display.
3. Press two number pads in order for a two digit option code.
For example, if you want to choose "CODE 1-0" from the cook
ending signal list, press number 1 pad and number 0 pad in order.
4. Press START pad to save changes.
• To change additional option codes, repeat steps 3 and 4.
■
User Options Table
■
How to shut off the clean filter reminder
• It will stop displaying automatically after 24 hours.
• Or it will be able to be shut off by pressing and holding stop pad for a while until a long beep sounds in
idle mode with the closed oven door.
3 long beeps for 3 seconds
1 short, 1 long beeps for 3 seconds
3 second beep
3 quick beeps for 3 seconds
5 quick beeps for 3 seconds
A key pad will beep when it is pressed.
No beep when a key pad is pressed.
The oven will beep when stage cook changes to the next stage.
No beep when a key pad is pressed.
Maximum Cooking Time is 60 minutes.
Maximum Cooking Time is 10 minutes.
10 preprogrammed cooks for key pads (0~9)
200 preprogrammed cooks for key pads (0~199)
Display will turn off if a key isn't entered in 1 minute.
Display will turn off if a key isn't entered in 2 minute.
Display will turn off if a key isn't entered in 3 minute.
Display will turn off if a key isn't entered in 4 minute.
Repeat feature not allowed.
Repeat feature is allowed.
No END message after finishing a cooking.
END message will be left on the display during display-on time.
A user may use preprogrammed pads and manual time cook.
A user may use preprogrammed pads only.
Clean filter message will show up for 24 hours every 90 days.
Clean filter message will show up for 24 hours every 60 days.
Clean filter message will show up for 24 hours every 30 days.
Clean filter message will show up for 24 hours every 10 days.
The oven will not display clean filter message.
Option Code
Setting
Description (Factory default setting in bold)
CODE 1-0
CODE 1-1
CODE 1-2
CODE 1-3
CODE 1-4
CODE 2-0
CODE 2-1
CODE 3-0
CODE 3-1
CODE 4-0
CODE 4-1
CODE 5-0
CODE 5-1
CODE 6-0
CODE 6-1
CODE 6-2
CODE 6-3
CODE 7-0
CODE 7-1
CODE 8-0
CODE 8-1
CODE 9-0
CODE 9-1
CODE 0-0
CODE 0-1
CODE 0-2
CODE 0-3
CODE 0-4
Cook Ending Signal
Key Pad Beep
On/Off
Stage Cook Change
Beep On/Off
Maximum
Cooking Time
Preprogrammed
Cook
Display OFF
Time Counter
Repeat Feature
COOK END message
Reminder
Manual Time
Cook Lock
Clean Filter
Reminder
