Daewoo KOG-39B50S, Руководство по обслуживанию

Страница: 12 / 27

DISASSEMBLY AND ASSEMBLY
4. Method to reduce the gap between the door seal and the oven front surface.
(1) To reduce gap located on part ‘A’.
Loosen a screw on stopper hinge top, and then push the door to
contact the door seal to oven front surface.
Tighten a screw.
(2) To reduce gap located on part ‘B’.
Loosen two screws on stopper hinge under, and then push
the door to contact the door seal to oven front surface.
Tighten two screws.
A sm all gap m ay be acceptable if the m icrow ave leakage does not exceed 4m W /cm
2
.
NOTE