Daewoo HL711D, Руководство по обслуживанию

Страница: 12 / 50

HL711S/HL711D Service Manual
-12-
FACTORY SET
If you push the up button more than 5 seconds in valid PC signal status, factory setting value in MCU
save into EEPROM. Every value changes factory setting value.
After factory set executes, power OFF
à
power ON automatically.
You must push the auto button because of optimum image quality automatically.
When user want factory setting value, you must execute this function.
BURN-IN MODE
If you push the down button more than 5 seconds in disconnected signal cable status, you can see changed
color.
Burn-In mode displays chaged color continually. (white, red, blue, green etc.)
We can check normal operating status of the monitor under mass production.
If you want to finish Burn-In mode, you can turn off the power by only push the power button.