11
R e c o r d i n g
C A S S E T T E S
Timer programme
Auto tracking
◆
For timer recording, clock, date, and stations
must be set correctly.
◆
Load a cassette with its safety tab in place and
with sufficient free space for the recording.
◆
To enter station numbers using the cursors
VW
.
◆
You can switch your televideo off during recording using the
button.(Don’t use the
main power button (ON/OFF) on the front panel of the set.)
The televideo will switch on and off automatically to record the timer event.
◆
If you have made a mistake, move to the position you want to change using the
VW
CB
button and change the setting.
◆
The recorder will eject cassettes which have the safety tab removed.
◆
You cannot access “Install menu” when “Timer porgramme” is setting. That means, if
you want to access “Install menu”, you should delete all data in “Timer programme”.
◆
Select the programming to erase or change If you want to erase this programming
press button CLEAR.
◆
If you wish to record from a satellite receiver select under “Pr” the satellite programme
location or AV (depending on the connection with the aerial cable or a SCART cable.)
NB : Leave the satellite tuner switched on and to the programme you want to record.
Choose”Timer programme”.
Select a free timer memory.
Set ......
- Pr.No
- The date (date, daily = osd is displayed ”day”, sun~ sat)
- Start and end time.
- The recording speed.
If you press the 0/ATK key in Playback mode, the televideo will operate the auto tracking function again.
VW
: Change
CLEAR: Delete
CB
: Select
: Store
MENU : Previous
Timer programme
No. Pr.
Date Start
End
PDC SP/LP
1
01
05
14:18 17:15
Off
SP
2
---
---
--:--
--:--
Off
SP
3
---
---
--:--
--:---
Off
SP
4
---
---
--:--
--:---
Off
SP
5
---
---
--:--
--:---
Off
SP
6
---
---
--:--
--:---
Off
SP
PDC(VPS)
If a programme starts late or runs over, programme delivery control PDC(VPS) makes sure it gets recorded.
In rare cases, poor reception or a fault at the TV station may stop PDC(VPS) from working properly: if this
happens, set PDC(VPS) to ‘NO’ when you programme the timer.
Allow a few extra minutes recording when PDC(VPS) is off. Your television guide might show a PDC(VPS)
start time different to the normal programme start time; be sure to enter PDC(VPS) start time.
