9
4
3
6
8
5 7
1 2
FN-063R
FN-093R
FN-146R
1
4
2
6
7
5
4
0
1
11 9 1
2
3
5
7
8
6
6
Cleaners
: The cleaners noted below are available.
Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on
any surface.
Exterior
: Wipe with damp, sudsy cloth, rinse and dry.
For stubborn stains and for periodic waxing, use silicon wax.
Evaporator
: When refrigerator needs defrosting turn thermostat dial to “OFF”.
Do not use sharp instruments.
Refrigeration Section
: Wash shelves and other removable parts in warm sudsy
water, rinse and dry.
Wash interior with baking soda solution (3 table spoons to
one quart of water) or warm sudsy water, rinse and dry.
Magnetic Door Seals
: Wash with warm sudsy water.
The Finishing Touch
: Replace all parts and return thermostat dial to desired setting.
• Install refrigerator in a convenient location away from extreme heat and
cold. Allow sufficient clearance between the refrigerator and side wall so
the door will open for a fully usable interior. Refrigerator is not designed
for recessed installation.
• Select a place with strong level floor.
• Allow 5 inches of space between the
refrigerator’s side and the wall.
HOW TO CLEAN
HOW TO INSTALL
5
inches
1. EVAPORATOR
The heart of the refrigerator.
It evaporates the refrigerant fluid and
thereby absorbs heat from the
surrounding. Made of pure aluminum.
9. DRAIN PAN : (Use of Defrost Only)
Discards the water that drips of the
evaporator when defrosting.
3. CONTROL BOX
Regulates the operation of the motor
and controls the inside temperature of
the refrigerator.
4. SHELF
Has full width and can slide out.
5. RACK
for butter, eggs, and small size goods.
6. MAGNETIC DOOR SEALS
Keeps the refrigerator virtually airtight
all along the edge, but is nevertheless
easy to open.
2. ICE CUBE TRAY
Ice cubes are easy to remove from
the tray.
7. USABLE RACK
for cans or jars.
8. BOTTLE RACK
for bottles, cans or jars.
10. CRISPER
for vegetables and fruits.
11. SLIDE OUT CRISPER COVER.
5
