background image

15

PROBLEM

CHECK POINT

These cases are not malfunctions

 The sound "wing" heard during water supply is the operating sound made by the water

inlet valve.

 The sound "sha" heard in stopping the tub is the sound that comes from the

autobalancer of the tub.

TROUBLE SHOOTING

 The washer will not spin;

If the clothes is collected on one side
during spin and the tub becomes
unbalanced, the spin operation will be
interrupted, and then this unbalanced
condition will be corrected by following
operation: WATER SUPPLY 

RINSE

DRAIN However if the unbalanced
condition is unchanged despite repeating
the above operation, the lamp 

will

light up, and the buzzer will sound to
indicate a problem.

Most problems are easily solved if you understand the cause. 
Check the following list for problem before calling for service.

Before calling for service, check these

 The washer will not

operate at all.

 Water is not supplied;

If water supply is not finished within 30
minutes, the lamp 

will light up, and

the buzzer will sound to indicate a problem.

 The washer will not drain;

If the drain is not finished within selected
time, lamp 

will light up, and the buzzer

will sound to indicate a problem.

 Is there a power failure?

 Is the power cord correctly connected to an electric outlet?

 Is the electric fuse broken?

 Did you turn on the power?

 Did you press Start/Hold button?

 Is there correct amount of water in the tub?

 Did you connect the inlet hose and open the water tap?

 Is the inlet hose or the water tap frozen?

 Is the water supply shut off?

 Does foreign matter block up the inlet hose filter?

 Is the drain hose frozen or blocked up by dirt?

 Is the drain hose kinked or deformed?

 Is the end of the drain hose immersed in water?

 Is there excessive dirt inside the pump housing?

 Is the clothes in the tub collected on one side?

 Is the washing machine installed on an uneven floor or is the

vibration serious?

 Is the lid open?

(The lamp 

will light up in this case.)

 DWF-800W/802W/750M/752M  00.5.25 10:45 AM  ˘

`

15

Содержание DWF-750M
















Отзывы: