10
THE FUNCTIONS OF THE CONTROL PANEL
Press this switch to turn the power on or off.
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operation;
Press the ‘Start/Pause’ button
ᵎ
Select the program that you want to change
ᵎ
Press the ‘Start/Pause’ button again.
You can select the course you want, and each light is turned on when that cycle
is selected.
For the more detailed information, please refer to the page 12~24.
It can be used to adjust temperature of water according to types of the load to be
washed. As the button is pressed, temperature of water is selected by
Cold
ᵎ
20°C
ᵎ
40°C
ᵎ
60°C
ᵎ
95°C
By pressing the spin button, the spin speed can be chosen.
Rinse Hold
• Is selected by pressing the spin button repeatedly. This function leaves clothes in
the machine; suspended in the water after a rinse without entering into spin.
• To proceed through to a drain or spin, after the Rinse Hold function is completed,
use spin button.
Spin Only
• If you want only spin, you can operate spin only.(See page 24.)
Pre-Wash
• The washer operates one additional wash and spin before the main wash.
• If the laundry is heavily soiled, Pre-Wash course is effective.
• Pre-Wash is available in Cotton, Baby Care and Synthetic programs.
Rinse+
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
Water+
• If you want to use more water in the rinsing, press this button.
Use this function when you want to reduce the laundry time or wash the mild dirty.
It reduces the laundry time and saves (lower) energy consumption.
It can be used to pre-engage time for wash.
Reservation can be made from 1 hours to 12 hours.
Use this function when you want to protect any accident occurring from handling of washer by a
child. During an operation of washer, press ‘Spin’ and ‘Option’ buttons simultaneously.
In Child Lock mode, no button functions except for Power button.
In Child Lock mode, press ‘Spin’ and ‘Option’ buttons simultaneously like setting Child Lock and
Child Lock is cancelled.
To change to the desired program, while in Child Lock mode;
1. Press both the ‘Spin’ and ‘Option’ buttons together once again.
2. Press the Start/Pause button.
3. Select the desired program and
press the Start/Pause button again.
• The Child Lock will be cancelled when
power is off.
Use this function when you want the machine not to alarm when finished.
During an operation of washer, press 'Temp.' and 'Spin' buttons simultaneously.
You should set this function whenever you want to silence the buzzer.
Change the
desired
program
