9
* Please be sure to read and follow the installation operation manual(Stacking Kit Model : K-ST1*)
People's safety is the first priority.
There are many safety particulars in the guidebook
and product. Therefore, please be sure to read and
abide by all safety particulars.
Stacking kit(K-ST1*) allows the dryer to be fitted to
the top of washing machine.
Model DWD-WD31WW
DWD-WD33WS
DWD-WD33SS
DWD-WD33RS
The kit contains, all the nessary brackets and
screws.
Tools needed - Screwdriver, drill tip(ø3.5mm,
Length < 80mm), power or hand drill.
1. Place washer firmly on a stable, even and solid
floor as product installation instructions decribes
in owner's manual.
2. Lift and place the dryer on top of the washer
3. Peel protectie paper off the double sided tape
from the rear bracket of the stacking kit.
4. Push and fix the front and rear bracket of the
stacking kit as shown in the picture.
5. Drill a hole in the both sides of stacking kit and
the both sides of top plate.
(hole Dia. 3.5mm)
6. Screw both sides of the rear bracket.
CAUTION : When installing the said product, please be sure to let the expert with electrictiy & machine related
training and sufficient experiences install it.
Excessive load is dangerous.
In case of installing and carrying the adjustable cases of
the washer and dryer, more than two persons should
do it together. Please let children not play on the cases.
Installation methods
