18
2. DELAY WASH
Note :
•
If you want to review the selected program,press the ‘Start/Pause‘ button again.
•
Preparing washer before starting ‘Delay Wash’.
- Turn on the water tap.
- Load laundry and close Door.
- Place the detergent and fabric softener in the detergent case if needed.
•
The actual finishing time may vary do to water temperature and water supply conditions.
•
‘Gym Shoes’, ‘Delicate’, ‘Drum Cleaning’ and ‘Steam Spray’ program are not programmable ‘Delay Wash’.
•
Adding clothes during ‘Delay Wash’ operation is not allowed.
1
Put the laundry into the Drum and check the detergent and softener levels.
(refer to page 10)
Then close the Door.
2
Press the Power button.
• The LED shows only ‘- --’ signal.
Note
:
If one or all of the detergent dispensers are low, the low detergent indicator
will light and the beeper will sound.
3
Select the program using the program selection dial.
• If you press ‘Start/Pause’ button after pressing Power button the washer will default
to the normal cycle, if you have not selected a different wash cycle.
• If you want to change any of the following ‘Water Temperature’, ‘Soil Level’, ‘Washing
Cycle’, ‘Rinse Time(s)’ or ‘Spin Speed’, select the program you want to change by
pressing its corresponding button.
• If you want to use bleach, press ‘Bleach’ button.The bleach will be automatically
dispensed at the proper time during the wash cycle.
4
Press the ‘Delay Wash’ button.
• The ‘Delay Wash’ indicator light will turn on.
• Select the delay time you want from 1 hour to 12 hours by pressing button.
• The finishing time will be indicated on the display.
5
Press the ‘Start/Pause’ button.
• If the cycle has been successfully programmed the Delay Wash and Lock indicators
will light.
