Unscrew the screws at the marked
position with a screwdriver
Turn the filter cover clockwise and
pull it out.
Clean the foreign matters and reinstall
the filter cover
Clean the barrel
After the washing machine has been used for a period of time, there may be dirt in the
washing cylinder. The purpose of cleaning the inner and outer barrel can be achieved
by using the tub cleaning procedure.
Note: do not put clothes and detergents into the barrel in tub cleaning mode.
Cleaning of connector assembly
1. Remove the water inlet hose on the connector assembly side.
2. Unscrew the tensioner in the direction of the arrow.
3. Flush the inside of the tensioner with water.
4. Reinstall the cleaned tensioner and water inlet hose.
Clean the drain filter
• Because there will be water falling from the drain outlet, please prepare the water
receiving container in advance and then open the drain outlet cover.
• Before disassembling the filter, please make sure that the water stored in the wash-
ing machine has been cooled to avoid scalding.
|
13
|