Daewoo DWD-E1200R S, Руководство по обслуживанию

Страница: 34 / 64

30
4. ERROR DISPLAY
MESSAGE ERROR CAUSE SOLUTION
The water tap is closed. Open the water tap.
The filter of the valve inlet is clogged. Clean the filter of the valve inlet.
The valve inlet is an inferior product or broke down. Change the valve inlet.
The water level sensor (sensor pressure) is an inferior product or Change the water level sensor
broke down. (sensor pressure).
The drain motor works during water supply. Change the drain motor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
The drain hose is kinked or clogged. Clean and straighten the drain hose.
The drain motor is an inferior product. Change the drain motor.
The valve inlet works during drain. Change the valve inlet
The water level sensor is an inferior product . Change the water level sensor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
The laundry is concentrated to one side of the drum Rearrange the laundry.
during spin.
The Start/Hold button is pressed while the door is opened. Close the door.
The switch door lock is an inferior product. Change the switch door lock.
The PCB ASS’Y does not check the door lock. Change the PCB ASS’Y.
The water is supplied continuously due to an inferior valve inlet. Change the valve inlet.
The valve inlet is normal, but the water level sensor Change the water level sensor
(sensor pressure) is inferior. (sensor pressure).
The drain motor dose not work. Change the drain motor.
(The drain motor is an inferior product or broke down.)
The fan motor does not work. Change the fan motor.
(The fan motor is an inferior product or broke down.)
The PCB ASS’Y does not control the fan motor. Check the connector or change the
PCB ASS’Y .
Water leaks from the tub or the hose drain. Check the leak of the tub or the hose drain.
Then change the tub or the hose drain.
The foreign matter is jammed in the drain bellows. Remove the foreign matter in the
(Non-pump model) drain bellows.
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
The motor is an inferior product. Change the motor.
The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
The motor spins into an opposite direction. Change the PCB ASS’Y or the motor.
The motor hall IC is an inferior product or broke down. Change the motor hall IC or the motor.
The motor is not normally connected. Check the connector of the motor.
The motor does not work. Change the motor.
(The motor is an inferior product or broke down.)
The water level sensor is an inferior product. Change the water level sensor.
WATER INLET
ERROR
IE
DRAIN
ERROR
OE
UN-BALANCE
ERROR
UE
DOOR OPEN
ERROR
LE
OVERFLOW
ERROR
E2
FAN MOTOR
ERROR
E3
LEAKAGE
ERROR
E4
HIGH VOLTAGE
ERROR
E5
EMG ERROR E6
DIRECTION
ERROR
E7
MOTOR ERROR E8
SENSOR
PRESSURE ERROR
E9