E-26
E-27
E-26
E-27
Washing procedure and program selection
(cont.)
NOTE
• If you want to change the setting during operation, press the ‘Start/Pause’ button to hold the operation and
change the program you want to change by pressing each correspinding button.
• Please wash seperated colorful clothes.
• All washing temperatures are selectable with Kids Care program.
• The appropriate amount of laundry for Kids Care program is below 3.0kg.
CAUTION
• If you select washing temperature ‘95’ °C, some cold water is supplied before the drain of main wash.
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead
of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
1
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash and prewash compartments in the detergent case.
Softener should be below the ‘MAX’ level.
• Put detergent into the prewash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with
detergent.
2
Press the Power button.
• The LED shows only ‘- --’ signal.
3
Select the ‘Kids Care program using program selection dial.
• Main wash and rinse and ‘400rpm’ spin speed and 60°C water temperature
are selected automatically.
• If you want to change the ‘Washing course’ and ‘Rinse time’ and ‘Spin speed’ and
‘water temperature’ select program what to change by pressing each button.
4
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
* KIDS CARE PROGRAM
DWC-ED1432(영)_CUTA(MALTA향).indd 26
2017-08-10 오후 3:11:07
