13
FUNCTION
ON TIMER
Push the ‘TIMER/CANCEL’
button when unit is off.
(REMOCON ONLY)
SLEEP MODE
Push the ‘SLEEP’ button in
‘COOLING’ mode.
(REMOCON ONLY)
OPERATION
1. Timer is changed to as follows by
pushing “TIMER/CANCEL” button.
(1hr
→
2hr
→
3hr
→
4hr
→
5hr
→
6hr
→
8hr
→
10hr
→
12hr
→
16hr
→
20hr
→
24hr
→
cancel)
2. The unit starts working after set time
is over in cooling mode with last
temperature set.
3. If you want to cancel timer, push this
button again at any time.
1. SLEEP MODE is changed as follows
by pushing “SLEEP” button.
(L1
→
L2
→
cancel)
* L1 Mode
– The unit is off after 4 hours.
– The desired Temp is increased 3°C
(5.4°F) for 4 hours.
– Fan speed is set to ‘LOW’.
* L2 MODE
– The unit works as follow.
– Fan speed is set to ‘LOW’.
2. Set proper desired room temperature,
fan speed.
3. This mode can be selected in
‘COOLING’ mode only.
DISPLAY
1. ‘TIMER’ lamp lights.
2. Setting time is displayed.
3. After a few seconds, display is
changed to current room
temperature.
1. ‘L1’ or ‘L2’ is displayed.
TIMER/
CANCEL
SLEEP
• ROOM TEMPERATURE DISPLAY.
Over 45°C or 100°F
5°C~45°C or 41°F~99°F
Below 5°C (41°F)
DISPLAY TEMPERATURE
ON
OFF
2hr
2hr
2hr
2hr
2hr
+1
°
C
+1
°
C
FAN
ROOM
TEMP.
TEMP
DESIRED
TEMP.
TIMER
ENERGY
SAVE
TURBO
COOLING