16
• HOW TO INSTALL THE DRAIN CAP
Install the drain cap like Fig. of the right side.
There are two kinds of method to install the drain cap.
The first method is that the shape of hole like
It is good for the household.
The second method is that the shape of hole is like
It is good for the shop.
• WINDOW INSTALLATION
1. Determine Window Location.
Determine a suitable location.
The window where the Air Conditioner is to be installed should have enough strength to bear the weight of
the Air Conditioner.
2. Measure unit’s dimensions
3. Install the Mounting Angle at the Proper Location.
Install the Air Conditioner using the Mounting Angle or other Hardware to be installed as shown in Fig.6
For proper drainage, Rear side of the unit should be declined about 10~15mm lower.
4. Insert unit in window.
With 2 people, lift unit and insert it into the window opening.
5. Finish opening
Close up the gap between unit and window using the sponge or tape for insulation as shown in Fig. 6
* If through the wall installation is required, you may choose to consult an independent servicing DAEWOO
Dealer.
INSTALLATION INSTRUCTIONS (CONTINUED)
CAUTION : Two people must work together to avoid personal injury.
Close up the gap
Mounting Angle
unit
wall
10mm~15mm
Fig. 6 Mounting Angle Installation.
The rear side of the unit
Drain Cap
