background image

 

DW-8000P 

                                                        Installation Guide

 

 

 

Before you Start! 

 

The DW-8000P Installation Guide tells you everything you need to know to install and use the DW-

8000P card. This guide is designed to walk you through the installation of the DW-8000P card and 

drivers, and then through the establishment of an Internet service connection. 

This is a (3) step process. 

 

Step 1 – Gather system and service connection information 

 

Step 2 – Install the ADSL modem card 

 

Step 3 – Install the drivers and establish an Internet service connection 

 

 

If you’re a beginner to the Internet 

– or if you’re experienced but have never installed an 

ADSL PCI card before – Start at the beginning and work your way carefully through the 

instructions. It is important to gather all the information required before you actually install the 

PCI card and ADSL drivers. 

 

 

If you’re familiar with installing PCI cards and drivers 

- you may be able to browse the 

chapters to get the basics - However, it is still important to gather all the information required 

before you actually install the PCI card and ADSL drivers. 

 

 

Your ADSL board only has one RJ-11 connector for ADSL connection. POTS splitters or 

microfilters can be plugged outside from the board using multiple port phone jacks. 

 

 

hkz

s

hj{

jyj

spur
kh{h

 

 

DW-8000P 

                                                        Installation Guide

 

 

Step 1 –

 Gather system and service connection information

 

 

System Requirements 

 

Make sure your PC system meets 

ALL

 of the following minimum hardware and software requirements: 

 

Hardware: 

 

IBM PC/AT or compatible 

 

Pentium 66Mhz or faster 

 

2Mbytes available hard disk space or more 

 

2x CD-ROM drive or better 

 

32Mbyte available system memory or more 

 

Software:

 Your Operating System must be one of the following: 

 

Microsoft Windows 95 – Win 95A, Win 95B 

 

Microsoft Windows 98 – Win 98, Win 98A 

 

Microsoft Windows Millennium Edition – Win ME 

 

Microsoft Windows NT 4.0 with Service Pack 5 or latest – Win NT 

 

Microsoft Windows 2000 – Win 2k 

 

Determining Your Operating System 

 

You will need to know the exact version of Microsoft Windows installed in your computer. If you 

do not know or are unsure, please proceed as follows to determine your version of the Microsoft 

Operating System. On the desktop, right click 

My Compute

r. Then select 

Propertie

s. The 

version number of the Microsoft Windows Operating System installed in your computer will be 

displayed on the 

General 

tab. Refer to the following table for more detailed information. 

 

Version  System 

Description  Release Name  

Win 95A  

4.00.950A  

Windows 95 OSR1 

Win 95B  

4.00.950B  

Windows 95 OSR2 

Win 98  

4.10.1998  

Windows 98 

Win 98A  

4.10.2222A  

Windows 98 2

nd

 

Edition 

Win 2k 

5.00 2195                        Windows 2000 

Win NT  

4.00.1381  

Windows NT 4.0  

Win ME 

4.90.3000 

Windows Millennium Edition 

 

 

 

 

Содержание DW-8000P









Отзывы: