DW-8000P
Installation Guide
11
9.
You can set the IP configuration.
10.
The driver installation is now almost completed. Click on “Close” for exit. You should see
various window messages.
11.
It is important to remember to install/reinstall latest service pack for Windows whenever
you are adding components to your system since older system files may be copied back to
Windows during installation. And after that you should reboot machine again.
DW-8000P
Installation Guide
12
Appendix A - Connector Pinout
The
DW-8000P
card is equipped with a RJ-11 jack for connection to the ADSL
data port – identified by the ADSL installation. The center two pins, pins 3 and 4,
are used for ADSL data. For the
DW-8000P
card to make a proper ADSL
connection, the installed ADSL data port should also use pins 3 and 4 for data. If the
ADSL data port installation uses pins 2 and 5 for data, then a wiring converter will be required. Do not
alter or remove the wiring converter if present.
NOTE:
Consult with your ADSL provider before attempting any wiring changes.
