30
On-Screen Display Overview
Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• SAP Audio Signal :
Stereo
➝
Mono
➝
SAP
➝
Stereo
• STEREO Audio Signal :
Stereo
➝
Mono
➝
Stereo
• SAP Audio Signal :
Mono
➝
SAP
➝
Mono
• MONO Audio Signal :
Mono
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
Changing the TV Audio Channel
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
…
/
†
] buttons on the front panel.
Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no rewritable DVD disc is inserted, you would see a screen like the following:
If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the
first button press. If you press [DISPLAY] again then the TV information is
displayed.
Displaying TV Information
DVD-Video
CH-6
02:26 AM
■
STOP
DW-Q74D2N-LS(GB)USA 2005.9.21 3:21 PM ˘
` 30 mac001 1200DPI 90LPI